Simplify And Speed Up The Way You Clean Up And Transfer Liquids.
This tiny device converts a metal drum into the ultimate air powered vacuum allowing you to clean up all types of liquids with ease.
Used by companies such as:
or you’re just looking for a faster and easier way to clean up liquid?
Any of these things sound familiar? If they do, you’re in the right place.
The Kleenvac Pneumatic Vacuum Will Help You Make Your Liquid Clean Up Job Simple….
And this is why…
Once you have cleaned up as little as 301 L* of liquid spills with the Plus rather than absorbents, you can start to save money.
*Based on the average cost of 17 general purpose absorbent spill kits available online in Australia.
The high vacuum means you can clean up all types of liquids such as:
Water – Mud & Sludge – Oil – Engine Oil – Gear Oil – Paint – Diesel – Corrosive Liquids* – Concrete Slurry – Radiator Coolant
*stainless steel model recommend
In This Video: AV Industry Services in the Northern Territory previously used electric and diaphragm pumps to vacuum out hydraulic oil from the equipment they serviced and it used to take them more than 25 minutes to complete the job. However, once they started using a Plus they reduced the clean-up time down to less than 3 minutes.
In This Video: AV Industry Services in the Northern Territory pump out a 44 gallon drum of used oil into a large bulk storage tank for recycling.
You don’t need to worry about solids blocking up or damaging your pump half way through a job. This is because the Kleenvac simply creates a vacuum in the drum which pulls the fluid through the hose.
In This Video : The Plus cleaning up mud off the ground. See how it easily cleans up the wet mud and solids over the 20m distance. You will notice that as the mud becomes more solid the plus still handles it easily but just takes a bit longer to clean it up. An easy way to speed up recover when this happens is to simply add a bit more water.
The Kleenvac uses the venturi principle to generate the vacuum and airflow which means their are no moving parts required.
Only air goes through the pump while the liquid and solids pass through the hose and into the drum.
From frustrating liquid clean-up to faster, easier and cheaper clean-up, all in one reliable tool.
The Kleenvac Plus
Supercharged Vacuum – No Moving Parts To Burn Out – Clean Up Made Easy
Everything required to install it into your drum:
Required Compressor Free Air Delivery:
850L/min (30CFM) @ 90-100PSI
Vacuum Flow Rate:
up to 150L/min (40GPM)
up to 3.5m (11.5ft)
up to -47.5kPa (-14inHg)
Pumping Flow Rate:
up to 105L/min (28GPM)
up to 3m (9.8ft)
Pumping Drum Pressure:
up to 43.3kPa (12.2inHg)
You will need a compressor with at least 30CFM of Free Air Delivery @ 90-100PSI
Liquid Spill Clean-Up And Liquid Collection And Transfer
Of Liquids Such As:
And Applications Like:
* The entire materials provided herein are for reference only. ONEKLEEN reserves the right to modify or revise the content at anytime without prior notice. Performance specifications were measured using water, a 60L drums and the drum ready kits.
Tech Specs + Kit Overview + Setup